Fixed electric ash unloading ball valve

Release time:

2024-04-26

1. fixed electric ash unloading ball valve product introduction: Electric fixed unloading ball valve is a new generation of high-performance ball valve, suitable for long-distance pipelines and general industrial pipelines. Special considerations have been made in the design of its safety and resistance to harsh environments, and it is suitable for various corrosive media. Compared with the rolling ball valve, the acting force generated by the fluid pressure in front of the valve in the pipeline on the ball is all transmitted to the bearing during operation. The ball will not move. The valve seal is realized by pushing the valve seat by the spring and the medium pressure, so the valve seat will not bear excessive pressure. Therefore, the electric flange fixed ball valve seat has small deformation, short and light operating force, reliable sealing performance and long service life. It is especially suitable for occasions with main pressure and large caliber.

1. fixed electric ash unloading ball valve product introduction:

Electric fixed unloading ball valve is a new generation of high-performance ball valve, suitable for long-distance pipelines and general industrial pipelines. Special considerations have been made in the design of its safety and resistance to harsh environments, and it is suitable for various corrosive media. Compared with the rolling ball valve, the acting force generated by the fluid pressure in front of the valve in the pipeline on the ball is all transmitted to the bearing during operation. The ball will not move. The valve seal is realized by pushing the valve seat by the spring and the medium pressure, so the valve seat will not bear excessive pressure. Therefore, the electric flange fixed ball valve seat has small deformation, short and light operating force, reliable sealing performance and long service life. It is especially suitable for occasions with main pressure and large caliber.

2. product features:

1. The valve seat adopts a spring structure, which pushes the valve seat to the ball to ensure good low-pressure sealing performance.
2, before the fixed ball valve valve, the valve seat can be sealed, the so-called two-way sealing characteristics, the use of its own discharge valve, the valve body cavity can be discharged outward.
3. The pivot adopts anti-blowing protection structure, low friction coefficient bearings, etc. With excellent performance, high reliability, wide range of uses.

3. product application specification:
1. Design and manufacture GB12237
2. Structure length as GB12221
3. Flange size according to JB/T79.179.4 GB/T9113.19113.4
4. Valve inspection and test according to BG/T13927